Insert the screwdriver at the bottom to lift the rollers from the track.
Removing sliding screen door from track.
There s a cartridge within your screen door that contains two wheels.
Work a flat head screwdriver under one of the wheels lift it and angle the door slightly until the wheel clears the track.
Slide the door over.
If you unloosen the screws the cartridge can be adjusted up or down.
Taking the door out of the track 1.
There s an adjustment screw for each wheel near the corners of the door s frame.
Get a helper to lift the door.
To get a sliding screen door out of the track you will have to adjust the wheel screws that are located on the four corners of the door frame itself.
This cartridge can move up and down inside the screen door and is held in place by two screws.
These wheels are what allow the screen door to move along a track.
Your first step is to remove the screen door from its tracks photos 1 and 2.
Once you have removed the bottom of the screen door repeat the same with the upper portion of the screen door.
In order to remove the door screen it must come off of the rollers.
Then working one end of the door at a time ease a flathead screwdriver under the wheel gently lifting up.
Pull the door up from the bottom track until the wheels are out.
To remove the screen door use a flathead screwdriver.
You ll see inner screws at the bottom of either side of the screen.
How to remove your sliding screen door step 1.
Open the door and ask your helper to slightly lift the screen door.
You will be able to tell the wheels are sufficiently.
Slip a flat screwdriver underneath the wheels and push them upwards.
Pushing the wheels up will make it easier to.
Using a phillips screwdriver turn the screw counter clockwise to raise the screen up until you see the head of the screw.
Turn the adjustment screws counterclockwise to release tension on the wheels and lower the door.
Repeat with the other wheel then angle the bottom of the door out and remove the door.